Wednesday, 26 September 2012

4pi Reprap Electronics


This is the new 4pi Reprap controller from Kliment


Some people have requested to see the back of the 4pi, so here it is also.

It features lots of things, but for me the main ones are:

Atmel’s SAM3U processor, which runs on a 32-bit ARM Cortex-m3 core.
(not sure what speed its running at, but the CPU can run at 96 MHZ)  

High-speed USB, The micro controller communicates with your computer at 480Mbits

5 Stepper drivers and 5 FETs.


So far there is no firmware for this. It is still under development.

Build details about the board can be found at https://github.com/kliment/4pi-firmware
And of course there is lots of info on the shop  


1 comment:

  1. This comment has been removed by a blog administrator.

    ReplyDelete